Toyota Camry (1992-96) Installation Instructions PDF
INSTALLATION INSTRUCTIONS Toyota CAMRY (1992-96) PART NUMBER: TY-50-92 Pro.Fit logo and part number will be right side up and readable when installed. TOOLS REQUIRED: #2 Phillips screwdriver, hook tool. PARTS INCLUDED: Pro.Fit VSMTM, instructions. LOCATION: To the right of the radio. STEP 1. Begin by removing the trim bezel surrounding the radio. To do this, insert hook tool between the console dash and the trim bezel at the bottom right and left corners. Bezel will release. Do not disconnect cigarette lighter wiring harness. Lay trim bezel to side. STEP 2. Remove the radio mounting screw on the right side of radio. Attach the phone hang-up cup onto Pro.Fit VSMTM. STEP 3. Position Pro.Fit VSMTM over centering pin and screw hole. Insert and tighten factory screw. STEP 4. Reinstall radio trim bezel back into position. This completes the installation of your Pro.Fit VSMTM. Pro.Fit International, Inc.?may not be held liable for any damage to a vehicle before, during or after the installation or removal ofthis Pro.Fit VSMTM. Pro.Fit may not be held liable for any personal injury resulting from accident or improper installation.
Related Free Ebooks :